 |
|
|
|
|
INTRODUCTION£º
Sky706,the latest design from Skyartec,is the 2.4Ghz of 7ch radio control for the market. It adopts the brand new digital technology £¬setting the radio control parameters through the cumputer software,with the features: fast response, High-precision and non-affect servos.The 2.4G frequency hopping coversAutomatic frequency matching,ID sorting that enlarges the capacity of its resisting disturbance;It is suitable for helicoptersand planes with normal flight and aerobatics.Also,it comes with the advantages of easy setting, steady signal, small power consumption and Strong signal power. Sky706 is available for novice and pilots.
upgraded from SKY705, the SKY706 adds new functions D/R and EXP,also upgrade hardware,believe can give you new experience. directly connect to computer,no trouble to instal driver.Adopt joystick port, user can play other game softwares by SKY706. SKY706 software is also improved, more details please refer to the manual.
Specifications:
- Channel: 7CH
- Frequency: 2.4G Scan Frequency
- Output power: <0.8mW
- Static current: <0.8mW
- Power resource: 1.5V¡Á8"AA"dry battery
- Output pulse: 1100-1900Ms
- Simulator jack: Yes
- Charging jack: Yes
- Weight: 560g
- Voltage display type: LED
- Antenna length: 14cm
|
| New functions: D/R & EXP |
|
| SKY706 V1.0 software |
|
| SKY706 Connection diagram of the transmitter and PC£º |
|
|
Introduction Of Transmitter(Front)
|
|
| 
|
- 1: Antenna
- 2: Carrying handle
- 3: Master switch
- 4: Gear switch
- 5: LED light
- 6: FLIGHT MODE SWITCH
- 7:Flaperon Mixing
- 8: Throttle&rudder stick(Mode2)
Elevator&rudder stick(Mode1)
- 9: Throttle trim lever(Mode2)
Elevator trim lever(Mode1)
- 10: Power switch
- 11: Throttle trim lever(Mode1)
Elevator trim lever(Mode2)
- 12: Throttle&aileron stick(Mode1)
Elevator&aileron stick(Mode2)
- 13: Rudder trim lever
- 14:Aileron trim lever
|
|
Introduction Of Transmitter(Back)£º |
| 
|
|
|
FLIGHT MODE INTRODUCTION: |
- Setting for the 6CH helicopter: It is the normal mode when the switch to "N"; it is the 3D stunt when the switch to "I". (For example V3 3CH,BELT250,NINJA400)
- Setting for the truangle wing plane: It is the normal mode when the switch to "N"; When switching to the "I" position, the angle of the servo arm travel for both aileron and elevator reduce 50%.(such as F16,SKYFUN)
- Setting for Fixed-wing plane: It is the normal mode when the switch to "N"; When switching the Flight mode to the "I" position,the flaperon mixing can change the angle of the aileron,so advance the elevator function further.(such as CESSNA)
- Remark:
1. Before turning on the transmitter,please switch the FLIGHT MODE to the "N" position, if not, there will be no emission signal, also the ESC will send out the acoustic alarm,this moment,please switch up the FLIGHT MODE to the "N" position.
2. if your model is 4CH or 3CH helicopter, you only can select the Normal mode.
3. We advise our beginner to select the normal mode,althought your model is 6CH.(of course,you can select the 3D aerobatic mode if you want to).
|
|
GEAR SWITCH INTRODUCTION: |
|
Gear switch: flameout switch
Remark: 1. Turn the Gear down when the transmitter connect with the computer programming.
2. Advice you turn the Gear down when you adjust the airplanes or helicopters. |
|
LED INTRODUCTION: |
| |
 |
- Three indicators(red and green)get light simultancously:The battery has been full charged,and it's safe to fly.
- Two indicators(red and green)get light simultancously:The electricity shortage,if you continue to fly, maybe it will happen bad situation, such as out of control etc.
- Only red indicator gets light:The electricity shortage seriously.You should stop flying immediately.
|
|
|
|
