RC Airplane
RC Helicopter
Multi copter
Spare parts
Radio Control System
Aux Fittings
Flying Combo
Upgrade spare parts
WASP  AUTO CP one key Switchover RTF
    MNH04-1    WASP AUTO CP on...
SKYARTEC ButterflyS  3-Axis Compass RTF
    MC02-1    SKYARTEC Butterf...
MINI SKYFUN 2.4GHz 3G3X Brushless(Without TX)
    MNFJ3X-02    MINI SKYFUN 2.4G...

 RC Helicopter >> WASP NANO CP >> WASP100 NANO CP 3D LCD 2.4GHz (Aluminum box version)
Point:19481  Date:9/2/2013 Print Back

WASP100 NANO CP 3D LCD 2.4GHz(Aluminum box version)

Detail pictures:
skyartec wasp nano cp skyartec wasp nano cp skyartec wasp nano cp skyartec wasp nano cp skyartec wasp nano cp skyartec wasp nano cp skyartec wasp nano cp skyartec wasp nano cp skyartec wasp nano cp

Thank you for purchasing SKYARTEC WASP NANO CP helicopter which is considered high-perfermance,easy control,stable,durable and light weight. WASP NANO CP adopts 3-axis gyro system with tail rotor ,incredible real-time responding in any 3D stunt flying. Furthermore,it offers good stability and agility with configurating LCD 2.4GHz 7CH radio control.

  Length: 225mm
  Height: 75mm
  Main rotor diameter: 240mm
  tail rotor diameter: 36mm
  motor pinion gear: 9T
  Main Drive Gear: 61T
  Flying Weight: 48g



 5 in 1 receiver board C;  3.7V 240mah LI-PO battery;  N40 brushed motor; tail motor;  2g servo(5 lines)x3;  USB charger;  USB power supply;  special screw driver; SKYARTEC CD;  NASA701 LCD 2.4GHz 7ch TX;  Aluminum box



  1. The fuselage adopt strong, durable , special plastics  
  2. Hi-performance 3-axis flybarless system by SKYARTEC provides with much  more stability, 
functionality and capability.
  3. Amazingly compact all-in-one and lightweight design will guarantee you  the most fresh and 
exciting flight experience. 
  4. Advanced configuration helps you control the helicopter precisely and  have the incredible 
real-time response which performing a variety of stunt  flying skills. 
  5. Five in one board integrating receiver, 3-Axis gyro, servo, main  Brushed ESC, tail Brushed ESC.
  6. Free to change flight mode:(Long press the button on receiver, handsoff after the indicator
light change color. Blue light is for beginner flight mode, red light is for 3D flight mode).  


 1.  All signal wire connectors must be connected correct as required, otherwise will result failure of receiving remote signal, even receiver burnt and so on serious consequences.
 2. To avoid the knob broken, it needs to use the special configured adjust pen when adjusting all knobs.  
 3. When code-pairing, helicopter must be satic placed horizontal position.                             
 4. When boot should follow the principle of ¡°turn on the transmitter first then power on the plane¡±. After turn on the transmitter, power on the plane within 10 seconds, receiver¡¯s indicator light start flashing slow about 1~3 seconds, which means it is receiving the signal.If the light not on, it means receiving no signal, code-pairing is needed. Indicator light flash fast after receiving signal, which means the gyro is initializing. If the red light turn to constant light, and sound the mechanical voice of servo reset, which means the receiver start to work.

one key 3D inverted setting Note:

Green light mode onekey automatic inverted software is opened to download from official webiste now!!
Just checked the download area, official website finially opened the dowload of the green light mode onekey automatic inverted software which was still in test before.
Please go to official website to download the software who are interested ( NANO CP (REV1.2)).
Notice for setting!!
1. Five points of inverted throttle curve should be setted to 100%

2. The 7ch of servo's positive and negative direction should be setted to arrows adown

3. Under open the IDLE model, push up the left ear of the radio control, the helicopter will automatic forth inverted,push down the left ear,the helicopter tail will turn back to normal flight
4. When the helicopter forth inverted,throttle should be down negative P(Pitch),throttle joystick no more than 50% can make the helicopter keep stopping, when helicopter turn over back, throttle joystick should be pushed up more than 50% to make the helicopter keep hovering
5. Be ready to switchover the gear switch anytime,which can reduce the broken due to improper control
6. It is better to look for a bit long grass meadow which can reduce the crash rate
7. Prepare for crash when just begin to practise
8. Prepare some spare parts first then you can play the helicopter without fear
9. This function only apply to green light mode
Product Introduction£º

Click to Download

one key 3D flight video:

Click to Download

Click to Download

Click to Download

Click to Download

NO.: HS041-1
Price: $ 10
NO.: HS046-1
Price: $ 8.6
NO.: NM003
Price: $ 25

    WASP NANO CP  Collocate
  Part# Description Sale Price Order
 MNH02-1 WASP100 NANO CP 3D LCD 2.4GHz (Aluminum box version) On sale $ 159
 MNH02-2 WASP100 NANO CP 3D LCD 2.4GHz (Color box version) On sale $ 139
 MNH02-3 WASP100 NANO CP 3D 2.4GHz (Without TX) On sale $ 89
 MNH02-3A WASP100 NANO CP 3D 2.4GHz (Without TX) On sale $ 89
 MNH03-1 WASP NANO CPX 3D LCD 2.4GHz Brushless RTF(Color box version) On sale $ 159
 MNH03-2 WASP NANO CPX 3D Brushless (Without TX) On sale $ 109

  Copyright @ 2014 R/C Model Fun .,CO LTD---Skyartec  
  Address: Room 910,9/F, Jin Fulai Building No.49-1 Dabao Rd Baocheng 28 district Bao'an district,Shenzhen, China