This brand-new (FC) CNC WASP V4 BELT 250 helicopter which is equipped with
   7-channel  transmitter,has been researched sucessfully.it's concepted to be a high
   performance,ease of control,stable,durable,and lightweigh helicopter.It adopts
   CCPM control component metal swashplate,metal tail rotor gear box set,belt driven
   system and professional gyro,which ensure the helicopter react fast on any kind of
   3D acrobatic flying courses and flight stability.furthermore,our new SKYARTEC's
   CNC WASP V4 BELT 250 is equipped with high quality CNC alloy rotor head/frame
  and matched with high performance 4500KV Brushless motor,Brushless ESC,and
   Li-po Battery.

  This CNC WASP V4 BELT 250 should be the perfect choice for both the beginners

  and experts due to its compact size,stability,and agility.Also,it has a great advantage

  that is: it is suitable for indoor,outdoor,backyard and stadium flying.In addition. It can

  be flown easily near the ground,and is highly damage-resistant.so don't hesitate to

  choose this item.

  Product included:

  Wasp V4 Belt 250 CNC helicopter  ; 18A brushless speed controller ; SKY 600  
   head  locked gyro  ;  4pcs servos ;4500kv brushless motor ; SKY703 2.4GHz 7ch
  TX/RX ;11.1V900mah LI-PO battery and balance charger;Color PVC canopy

 Feature:

  Adopts CCPM control component , metal swashplate,tail rotor and Belt driven
  system, professional gyro,  which ensure the helicopter react fast on any kind of 3D
  acrobatic flying courses and fllight stability.

  7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down &
  Pitch Control (RUDDER,  AILERON, ELEVATOR, Pitch AND THROTTLE) New radio
  control set

  High Performace 4500KV Outrunner Brushless Motor used as the main drive and
  makes the flight much stable and better performace

  High quality CNC alloy rotor head dopts Light weight,Ultra tough Carbon Fiber
  side board.

 Using alloy tail boom.

  Can fly in skyway, backward, and 3D aerobatic

  CCPM mixing control system and collective pitch structure

  120 degree CCPM system provides precise movement if comparing with the
  traditional mechanical mixing since there are less linkage/push-rod in the helicopter
  and weight is greatly reduced  mproved blades give superior lift. Their pop off design
  gives extra protection in case of heavy landing

  Bell-heller mixing greatly increase the sensitive of the whole helicopter, which  provide

  good aerobatic responds

  The autorotation landing system, made of high quality one-way bearing, maximally
  protects your helicopter from damage

  Hard, Light weight  ABS Blades

  Brand new design for the structure

  Improved battery support that holds the battery firmly, and can also be adjusted to
  suit your balance of flying

  Tail rotor driven by belt provide stable flight and low noise

  NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-
  Helicopter No need to  worry about burning tail motors

  Outer placed Head Lock Gyro

  11.1V 900mAh high capacitance Li-Po battery provide enough power for any

  aerobatic flight

  With length-adjustable servo push-rod, precision sub trim can be easily set

  Separate main shaft and main gear reduce repair time and noise

   Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and
  canopy reduce the load of whole helicopter

   Easy to fly and more stable lifting

   Sky703 2.4G receiving and transmitting system increases the operation stability

   With adjustable pitch system and 3D conversion

   Provide excellent performance outdoor and indoor

   Tail blade adopt flameout landing system

   Newly Designed Rotor Head gives better control

   Pre position servo mounts have been added in this helicopter, servos can be

   mounted solidly by screw and easy to install

   Extreme smooth control and stable flight

   Precise controlling and hovering

   Digital Proportional Motor Speed Control

   Suitable for Indoor/Outdoor/Backyard/Stadium

   Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the Helicopter
  does have very strong structure. In addition, the main rotor blades are using top
  quality  ABS Blades , which is extremely light and not easily break

  Approximately 15 minutes flight time on each charge - Optional Li- poly battery
   will help to achieve better performance and longer flight time.

   Best choice for Beginner - Advanced hobbyist

   All spare parts and accessories are available

   Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA
   batteries for the  transmitter not included)

  Specification:            

         Main Rotor Diameter : 470mm

                                 Length : 460mm

                      Flying Weight : 330g

                     Driven system : Skyartec 4500KV brushless motor

                                     Gyro : Sky600 Head Lock

                                     Serv : 3X Skyartec 9g + 1X Skyartec 5g

                                      ESC: Skyartec 18A

                                 Battery : Skyartec 11.1V 900mAh Lithium Li-Po